Home  |  About Us  |  Search  |  Contact Us  |  FAQs  |  Products  |  Warranties  |  Customer Service
  discbrakesrus

1300 and 1600 Exhaust Coating

Preparation:  Used, chrome plated, aluma-coated, rusted, or heavily soiled components will require chemical, mechanical, and thermal stripping processes prior to application of our coatings.  Stripping costs are directly related to the high cost of waste disposal.  Costs may vary due to the severity of surface damage.

NOTE:  Prices below are for 1300 high luster polished aluminum finish.  1600 is available in semi-gloss black and gray. 

Stripping:
 
Stripping / Masking $75.00 per hour

Ceramic coatings Headers

and cast iron manifolds Inside & Outside Coating
V8 Full Length multi piece $425.00 set
V8 Full Length Street $375.00 set
V8 Competition w/Collector Mufflers $430.00 set
Motor cycle exhaust pipes $275.00 set
Honda V Max Motor cycle exhaust pipes $295.00 set
V8 Marine Headers $430.00 set
V8 Shorty Street $325.00 set
4-Cylinder Street $185.00 set
V-4 Headers (V Max) $275.00
Cobra/Corvette with Side pipes $375.00 set
Manifolds intake $185.00
V8 Cast iron Exhaust Manifolds $225.00 set
V8 Cast iron Exhaust Manifolds Marine $425.00 set
V6 Cast iron Exhaust Manifolds Marine $375.00 set
Mufflers $50.00 and up
Oil Pan $125.00
Timing chain cover $90.00
Turbo Housings $125.00
Y pipes/H pipes $160.00
Straight pipes 3 inch $20.00 per foot
Straight pipes 4 inch $25.00 per foot
Straight pipes 5 inch $30.00 per foot
Valley pan $85.00 each
Water Pump $85.00 each

Powder Coating

Note; price below are for one coat special colors & candy colors add 50%

Stripping / Masking $75.00 per hour
Calipers 1-piston rebuilding charge per set, (you must add powder coat pricing to this) $100.00
Calipers 2-piston rebuilding charge per set, (you must add powder coat pricing to this) $150.00
Calipers 4-piston rebuilding charge per set, (you must add powder coat pricing to this) $200.00
Calipers 6-piston rebuilding charge per set, (you must add powder coat pricing to this) $250.00
Calipers 8-piston rebuilding charge per set, (you must add powder coat pricing to this) $300.00
Caliper Rear wheel w/ebrake per set, (you must add powder coat pricing to this) $250.00
Powder coat one color per set $89.00 per set
Powder two coats $50.00 extra per set
Air cleaners $125.00
Powder Coating Bumpers $200.00
Powder Coating Bumpers guards $200.00
Battery box $45.00
Brake Rotors $35.00 each
Brake Drums $45.00 each for one color--add $50.00 for two color
Calipers see above
Control arm $35.00
A-arm upper or lower $55.00
Engine blocks $325.00
Fenders small $145.00
Fenders Large $195.00
Frames Harley Davidson $450.00
Tubular K-Frame $285.00
Import/street/with seat $395.00
Import/street/with out seat $300.00
Quad $400.00
Car Gas tanks $375.00
Handle bars $45.00
Hood Hings $75.00 per set
Hood springs $50.00 per set
Hood latch $30.00
Kick stand $45.00
Manifolds $150.00
Manifolds two pc. $200.00
Pulleys $55.00
Pin head rod $35.00 each
oil pans $55.00
Rear ends $375.00 (All disassembled)
Rotors $35.00 each
Spindles $100.00 each
Springs Front $45.00 each
Swing arms-motorcross $75.00
Swing arms-Harley Davidson FX $75.00
Swing arms-Harley Davidson softail $85.00
Swing arms-import $85.00
Sway bar $35.00
Timing chain cover $65.00
Transmission crossmember $65.00
Transmission case standard $95.00
Valve covers 4-cyl $75.00
Valve covers 4-cyl Honda type W/spark plugs $100.00
Valve covers 6-cyl $100.00 per set
Valve covers 8-cyl $125.00 per set
Valve covers 8-cyl ford 4.6 DOHC $200.00 per set
Valve covers 12-cyl $200.00 per set
Valley pan $85.00 each
Wheels car up to 19 inch (no masking) $125.00 each
Wheels car 20 to 24 inch (no masking) $150.00 each
Wheels Motor cycle (no masking) $100.00 each
Wheels Motor cycle no spokes (no masking) $75.00 each
Water Pump $65.00 each

Powder Coating small to large parts

Powder coat (1 coat) $20.00 small part
Powder coat (1 coat) $40.00 Med part
Powder coat (1 coat) $60.00 large part
Powder coat (1 coat) $80.00 extra large part

Powder Coating Round parts

Powder coat (1 coat) $20.00 a foot 3 inch in diameter
Powder coat (1 coat) $25.00 a foot 4 inch in diameter
Powder coat (1 coat) $30.00 a foot 5 inch in diameter

   About Us  |  Terms Of Service  |  Privacy Policy

Site Created, Maintained, by db1racings.com
888 558 5757 ©2000