Home  |  About Us  |  Search  |  Contact Us  |  FAQs  |  Warranties  |  Customer Service
(EVERYTHING YOU NEED KIT) IF YOU DO NOT HAVE A DONOR CAR THEN THIS KIT IS FOR YOU COMPLETE FRONT AND REAR WHEELS GTM
Back to Top-A
Item Description
Price
  parking brake assembly

front control arm upper and lower

front knuckles

Hardware bolts

Hardware bolts

Brake line T

IF YOU ARE BUILDING A FACTORY FIVE CAR AND DO NOT HAVE A DONOR CAR THEN THIS KIT WILL GIVE YOU EVER THING YOU NEED TO DO YOUR BRAKES
Price$5165.95 note'calipers come with aimco pads for hawk pads add $139.95 front and rear just type in note:box at check out

ebrake handle ebrake cables rear control arm upper and lower

cv axles Hardware bolts

Hardware bolts

  TWO FRONT CALIPERS THE WORD GTM ON CALIPERS AND TWO (MADE IN THE USA) DRILLED AND SLOTTED ROTORS
  TWO NEW REAR CALIPERS AND FLANGE BRACKETS AND TWO (MADE IN THE USA) DRILLED AND SLOTTED ROTORS
$5165.95 KIT NO.GTM
NEW CORVETTE C5 PBR CALIPERS KIT FRONT AND REAR
POWDER COATING
Item Description
Price
  NOTE; To See Pictures OF Complete Kit, Click ON Far Right OF This Page
NEW CALIPERS
Price$1150.00
Click Here For complete Caliper kits
  (NEW GENUINE GM CORVETTE C5 PBR CALIPERS POWDER COATED RED WITH GTM NAME AND GM 13 INCH ROTORS) with this kit you get two New OEM Front and Rear calipers POWDER COATED RED WITH GTM NAME and two made in USA DRILLED AND SLOTTED ROTORS also two stainless steel hoses made by Russell
NEW CALIPERS AND DRILLED AND SLOTTED ROTORS
$1150.00
KIT NO. GTM "note" you can get this kit with hawk no dust pads for $139.00 type in note box at check out
Back to Top
  1997-2004 NEW Genuine GM Z06 POWDER COATED Gloss Black WITH GTM NAME in Yellow this set is for the Front of the 1997-2004 corvette Z06 Caliper Set (Front Wheels Left and Right)
$449.00
in most cases we can match the color of your car on the calipers
Back to Top
  1997-2004 NEW Genuine GM Z06 POWDER COATED RED BARON WITH GTM NAME in white lettering this set is for the Front of the 1997-2004 corvette Z06 Caliper Set (Front Wheels Left and Right)
$449.00
in most cases we can match the color of your car on the calipers
CALIPERS POWDER COATED GLOSS RED
Back to Top
  NOTE; REAR NEW CALIPERS MADE BY GM
NEW CALIPERS GLOSS RED 1997-2004
Price$399.95
  TWO CALIPERS WITH BRACKET AND PADS
for blue,black, yellow, silver,chrome,candy blue,candy red or other colors type in note box at check out
2005 WILWOOD BIG BRAKE KIT (FRONT WHEELS 13)
Back to Top
 Wilwood 4 Piston 13 inch Rotors Big Brake kit note: must have 17 inch wheels Chevrolet Corvette ZO6 2005 (Front Wheels)
13 inch Rotors
$1399.00 note:Powder coated with the word GTM add $399.95
2005 WILWOOD BIG BRAKE KIT (FRONT WHEELS 14)
Back to Top
 Wilwood 6 Piston 14 inch Rotors Big Brake kit note: must have 18 inch wheels Chevrolet Corvette ZO6 2005 (Front Wheels)
14 inch Rotors
$1921.00 note:Powder coated with the word GTM add $399.95
1997-2004 WILWOOD BIG BRAKE KIT (FRONT WHEELS)
Back to Top
 Wilwood 6 Piston 14 inch Rotors Big Brake kit note: must have 18 inch wheels Chevrolet Corvette ZO6 1997-2004 (Front Wheels)
14 inch Rotors
$2106.00
BREMBO BIG BRAKE KITS (FRONT WHEELS)
Back to Top
 Brembo Big Brake kit note: must have 18 inch wheels (Front Wheels)
14 inch Rotors
$3295.00
BREMBO BIG BRAKE KITS (REAR WHEELS)
Back to Top
 Brembo Big Brake kit note: must have 18 inch wheels (Rear Wheels)
13.6 inch Rotors
$2795.00
GTM SUSPENSION PARTS
Back to Top
Item Description
Price
Order
  FRONT CONTROL ARM LEFT AND RIGHT UPPER AND LOWER
  Genuine GM Parts
$549.95
GTM SUSPENSION PARTS
Back to Top
Item Description
Price
Order
  GTM FRONT KAUCKLES LEFT AND RIGHT WITH HUB AND BEARINGS
 Genuine GM Parts
$786.95
GTM SUSPENSION PARTS
Back to Top
Item Description
Price
Order
  REAR CONTROL ARM LEFT AND RIGHT UPPER AND LOWER
 Genuine GM Parts
$549.95
GTM SUSPENSION PARTS
Back to Top
Item Description
Price
Order
  GTM REAR KAUCKLES LEFT AND RIGHT WITH HUB AND BEARINGS
 Genuine GM Parts
$794.95
GTM REAR CV JOINTS
Back to Top
Item Description
Price
Order
  GTM REAR CV JOINTS LEFT AND RIGHT
 
$788.95
GTM REAR PARKING BRAKE
Back to Top
Item Description
Price
Order
  GTM REAR PARKING BRAKE ASS LEFT AND RIGHT
  Genuine GM Parts
$299.95
BANJO BOLT KIT CORVETTE FRONT AND REAR
Back to Top
Item Description
Price
Order
  NOTE:BANJO BOLTS ARE SOLD IN SETS OF 4 ONLY GM ORIGINAL EQUIPMENT BANJO BOLTS AND WASHERS TWO FRONT 10 MM X 1 BOLTS AND TWO REAR 10 MM X 1 BOLTS AND 8 WASHERS
  Corvette C5 1997-2004 BOLT KIT TWO FRONT BOLTS AND TWO REAR BOLTS AND 8 HEAT TREATED WASHERS (Set OF FOUR) (BANJO BOLT KIT) FRONT AND REAR WHEELS
$24.95
SPEED BLEEDER KIT
Back to Top
Item Description
Price
  NOTE; To See Pictures OF Complete Kit, Click ON Far Right OF This Page
MADE BY SPEED BLEEDER
Price$12.95
Click Here For complete Caliper kits
  CORVETTE 1984-2004 For Front or Rear 10 MM x 1.0 SPEED BLEEDER KIT (2 BLEEDERS) Made By SPEED BLEEDER (Front or Rear Wheels)
SPEED BLEEDER KIT
$12.95
DISC PADS
Back to Top
Item Description
Price
Order
  NOTE: PADS ARE HAWK PADS FOR HIGH PERFORMANCE VEHICLES
Gallery Image
Picture 1 Picture 2 Picture 3 Picture 4 Picture 5 Picture 6 Picture 7
  GTM FRONT WHEELS (Hawk High Performance HPS pads) nobody makes a pad better then this. the Quietest, Virtually noise free,Best Stopping Power,Extremly Low Dusting,Best Fade Resistant (Disc Pad axle set) (Front Wheels)
HPS High Performance
$97.95 Front Wheels
  GTM FRONT WHEELS (Hawk High Performance HP Plus pads for serious street and Autocross) nobody makes a pad better then this.Best Stopping Power,Best Fade Resistant (Disc Pad axle set) (Front Wheels)
Race Worthy for club racing events
$129.95 Front Wheels
  GTM REAR WHEELS (Hawk High Performance HPS pads) nobody makes a pad better then this. the Quietest, Virtually noise free,Best Stopping Power,Extremly Low Dusting,Best Fade Resistant (Disc Pad axle set) (Rear Wheels)
HPS High Performance
$89.95 Rear Wheels
DISC PADS
Back to Top
  CT731 Corvette Front wheels 1997-2004  -  BOBCAT CARBOTECH RACING PADS
BOBCAT COMPOUND
CT731 Bobcat Corvette Front wheels 1997-2004 (1521), the much anticipated replacement for our heralded Super Street F. Like our Panther line of compounds, Bobcat is a ceramic based friction material offering practically zero rotor damage. Bobcat offers outstanding performance when cold, very low dusting, and low noise with an excellent initial bite. Friction coefficient is .45 over it’s operating range of ambient temp to 900F. Bobcat is suitable for street, SCCA Solo 2 and Prosolo applications. Bobcat is not recommended for on-track driving schools or club racing.
$109.95 D-731
DISC PADS
Back to Top
  CT731 Corvette Front wheels 1997-2004  -  PANTHER PLUS CARBOTECH RACING PADS
PANTHER PLUS COMPOUND
CT731 Corvette Front wheels 1997-2004 PANTHER PLUS Carbotech A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range (150F to 1250F). Advanced compound matrix provides an excellent initial "bite", high coefficient of friction (0.54-0.56), and very progressive brake modulation and release characteristics. Panther Plus offers high fade resistance, rotor friendliness at all temperatures, and excellent cold stopping power. As a result, Panther Plus is an excellent choice for beginner-novice lapping day and high performance driver's schools on street driven cars using street or R-compound tires, eliminating the need to change brake pads at the track. Panther Plus has gained tremendous popularity with SCCA Prosolo/Solo2 competitors for its fantastic bite and modulation. In addition, Panther Plus has seen great success as a race-only pad on lighter improved touring and vintage race cars (ITC, etc). Not recommended as a daily-driving street pad due to possible elevated levels of dust and noise.
$149.95 D-731
DISC PADS
Back to Top
  CT731 XP8 Corvette Front wheels 1997-2004  -  CARBOTECH RACING PADS
XP8 COMPOUND
CT731 Corvette Front wheels 1997-2004 XP8 Carbotech A high torque brake compound with a wide operating temperature range (250F to 1350F). Outstanding initial bite at race temperatures, high coefficient of friction (0.58-0.60), excellent modulation and release characteristics, extremely high fade resistance, very rotor friendly and excellent wear rates. Excellent for ITA, ITB, Spec-RX7, etc race cars. Perfect for intermediate - advanced track/HPED use with R-compound tires, but still can be easily driven to and from the track. Not recommended as a daily-driving street pad due to possible elevated levels of dust and noise.
$164.95 D-731
DISC PADS
Back to Top
  CT731 XP9 Corvette Front wheels 1997-2004  -  CARBOTECH RACING PADS
XP9 COMPOUND
CT731 XP9 Corvette Front wheels 1997-2004 Carbotech Another iteration of our successful Panther compound series, 1109 offers even higher initial bite, higher friction coefficient (.6+), and higher fade resistance (1400+F) than 1108 compound, yet still maintains the rotor friendliness and streetability that has made the ceramic-metallic based Panther line so popular. This compound is intended for expert - instructor level HPDE drivers as well as upper level regional and national road-racing (ITA, ITS, Spec Miata, SSC, SSB, FF Cobra, etc) Panther XP9 has already won multiple SCCA regional and national championships in 2003, its first year of release. Not recommended as a daily-driving street pad due to possible elevated levels of dust and noise.
$164.95 D-731
DISC PADS
Back to Top
 Corvette CT731 Corvette Front wheels 1997-2004  -  XP10 CARBOTECH RACING PADS
XP10 COMPOUND
CT731 XP10 Corvette Front wheels 1997-2004 Carbotech For 2004, Carbotech unleashes Panther XP10 (compound 1110). This is an *extremely* high initial bite material, with a friction coefficient well above .6. Fade resistance is in excess of 1600F. Due to the high level of friction and bite, this material is recommended *ONLY* for cars in excess of 2600lbs using R-compound race tires or slicks (SCCA T1, T2, A Sedan, GT1, Trans-Am, Speed GT, etc.). On these heavier cars, 1110 still maintains the excellent modulation that has made the Panther-series of brake pads so popular. It is not recommended to drive this compound on the street or on the track with street tires due to the tendency to easily lock a lower-grip street tire with very little effort due to the high friction coefficient of this material. Note: Compound #1110 is more rotor aggressive than any other 1100-series compound.
$175.95 D-731
DISC PADS
Back to Top
  CT732 Corvette REAR wheels 1997-2004  -  BOBCAT CARBOTECH RACING PADS
BOBCAT COMPOUND
CT732 Bobcat Corvette REAR wheels 1997-2004 (1521), the much anticipated replacement for our heralded Super Street F. Like our Panther line of compounds, Bobcat is a ceramic based friction material offering practically zero rotor damage. Bobcat offers outstanding performance when cold, very low dusting, and low noise with an excellent initial bite. Friction coefficient is .45 over it’s operating range of ambient temp to 900F. Bobcat is suitable for street, SCCA Solo 2 and Prosolo applications. Bobcat is not recommended for on-track driving schools or club racing.
$89.95 D-732
DISC PADS
Back to Top
 Corvette REAR wheels 1997-2004 CT732  -  PANTHER PLUS CARBOTECH RACING PADS
PANTHER PLUS COMPOUND
CT732 Corvette REAR wheels 1997-2004 PANTHER PLUS Carbotech A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range (150F to 1250F). Advanced compound matrix provides an excellent initial "bite", high coefficient of friction (0.54-0.56), and very progressive brake modulation and release characteristics. Panther Plus offers high fade resistance, rotor friendliness at all temperatures, and excellent cold stopping power. As a result, Panther Plus is an excellent choice for beginner-novice lapping day and high performance driver's schools on street driven cars using street or R-compound tires, eliminating the need to change brake pads at the track. Panther Plus has gained tremendous popularity with SCCA Prosolo/Solo2 competitors for its fantastic bite and modulation. In addition, Panther Plus has seen great success as a race-only pad on lighter improved touring and vintage race cars (ITC, etc). Not recommended as a daily-driving street pad due to possible elevated levels of dust and noise.
$129.95 D-732
DISC PADS
Back to Top
  CT732 XP8 Corvette REAR wheels 1997-2004  -  CARBOTECH RACING PADS
XP8 COMPOUND
CT732 Corvette REAR wheels 1997-2004 XP8 Carbotech A high torque brake compound with a wide operating temperature range (250F to 1350F). Outstanding initial bite at race temperatures, high coefficient of friction (0.58-0.60), excellent modulation and release characteristics, extremely high fade resistance, very rotor friendly and excellent wear rates. Excellent for ITA, ITB, Spec-RX7, etc race cars. Perfect for intermediate - advanced track/HPED use with R-compound tires, but still can be easily driven to and from the track. Not recommended as a daily-driving street pad due to possible elevated levels of dust and noise.
$136.95 D-732
DISC PADS
Back to Top
  CT732 XP9 Corvette REAR wheels 1997-2004  -  CARBOTECH RACING PADS
XP9 COMPOUND
CT732 XP9 Corvette REAR wheels 1997-2004 Carbotech Another iteration of our successful Panther compound series, 1109 offers even higher initial bite, higher friction coefficient (.6+), and higher fade resistance (1400+F) than 1108 compound, yet still maintains the rotor friendliness and streetability that has made the ceramic-metallic based Panther line so popular. This compound is intended for expert - instructor level HPDE drivers as well as upper level regional and national road-racing (ITA, ITS, Spec Miata, SSC, SSB, FF Cobra, etc) Panther XP9 has already won multiple SCCA regional and national championships in 2003, its first year of release. Not recommended as a daily-driving street pad due to possible elevated levels of dust and noise.
$136.95 D-732
DISC PADS
Back to Top
  CT732 Corvette REAR wheels 1997-2004  -  XP10 CARBOTECH RACING PADS
XP10 COMPOUND
CT732 XP10 Corvette REAR wheels 1997-2004 Carbotech For 2004, Carbotech unleashes Panther XP10 (compound 1110). This is an *extremely* high initial bite material, with a friction coefficient well above .6. Fade resistance is in excess of 1600F. Due to the high level of friction and bite, this material is recommended *ONLY* for cars in excess of 2600lbs using R-compound race tires or slicks (SCCA T1, T2, A Sedan, GT1, Trans-Am, Speed GT, etc.). On these heavier cars, 1110 still maintains the excellent modulation that has made the Panther-series of brake pads so popular. It is not recommended to drive this compound on the street or on the track with street tires due to the tendency to easily lock a lower-grip street tire with very little effort due to the high friction coefficient of this material. Note: Compound #1110 is more rotor aggressive than any other 1100-series compound.
$149.95 D-732

DISC PADS
Back to Top
Item Description
Price
Order
  NOTE: PADS ARE SOLD IN SETS ONLY and pads are made by aimco
  GTM (Disc Pad axle set) (Set) (Front Wheel) FRONT
$48.50
  GTM (Disc Pad axle set) (Set) (Rear Wheel) REAR
$42.50
GTM Front Rotors DRILLED AND SLOTTED ROTORS made by aimco
Back to Top
Item Description
Price
Order
  NOTE; BRAKE ROTORS ARE MADE by aimco DRILLED AND SLOTTED ROTORS (Front Rotor)
FRONT ROTORS
Price$199.95 IS FOR A LEFT AND RIGHT (Front wheels)
  (LEFT AND RIGHT 13 inch DRILLED AND SLOTTED ROTORS)
note:you can add Silver powder coating to your rotors for $49.95 just type in the note box at check
GTM Front Rotors SLOTTED ROTORS made by aimco
Back to Top
Item Description
Price
Order
  NOTE; BRAKE ROTORS ARE MADE by aimco SLOTTED ROTORS (Front Rotor)
FRONT ROTORS
Price$199.95 IS FOR A LEFT AND RIGHT (Front wheels)
  (LEFT AND RIGHT 13 inch SLOTTED ROTORS)
note:you can add Silver powder coating to your rotors for $49.95 just type in the note box at check
GTM REAR WHEELS DRILLED AND SLOTTED ROTORS made by aimco
Back to Top
Item Description
Price
Order
  NOTE; BRAKE ROTORS ARE MADE by aimco DRILLED AND SLOTTED ROTORS (REAR ROTORS)
REAR ROTORS
Price$199.95 IS FOR A LEFT AND RIGHT (Rear wheels)
  (LEFT AND RIGHT DRILLED AND SLOTTED ROTORS)
note:you can add Silver powder coating to your rotors for $49.95 just type in the note box at check
GTM Rear Rotors SLOTTED ROTORS made by aimco
Back to Top
Item Description
Price
Order
  NOTE; BRAKE ROTORS ARE MADE by aimco SLOTTED ROTORS (Rear Rotor)
Rear ROTORS 1997-2004
Price$199.95 IS FOR A LEFT AND RIGHT (Rear wheels)
  (LEFT AND RIGHT SLOTTED ROTORS)
note:you can add Silver powder coating to your rotors for $49.95 just type in the note box at check
ROTORS
Back to Top
  GTM 13 inch Rotor (LEFT) Rotor (each) FRONT WHEEL 13 inch Rotor
$74.50 LEFT
  GTM 13 inch Rotor (RIGHT) Rotor (each) FRONT WHEEL 13 inch Rotor
$74.50 RIGHT
ROTORS
Back to Top
  GTM 12 inch Rotor (LEFT) Rotor Rear Wheel (each) REAR WHEEL 12 inch Rotor
$74.50 LEFT
  GTM 12 inch Rotor (RIGHT) Rotor Rear Wheel (each) REAR WHEEL 12 inch Rotor
$74.50 RIGHT
STAINLESS STEEL BRAKE HOSES Note: With 3/16 inch ends
Back to Top
Item Description
Price
Order
  set made with 3/16 inch ends for standard 3/16 inch steel brake lines
  GTM S/S HOSE KIT FOR FRONT AND REAR WHEELS (set made with 3/16 inch ends for standard 3/16 inch steel brake lines) (Set) (HOSE KIT)
$119.95 with s/s brackets
STAINLESS STEEL BRAKE HOSES Note: DOT APPROVED CRIMPED ENDS
Back to Top
Item Description
Price
Order
  set made with 10MM ends for stock corvette steel brake lines this is the bubble flare type end
  GTM S/S HOSE KIT FOR FRONT AND REAR WHEELS (set made with 10MM ends for stock corvette steel brake lines this is the bubble flare type end) (Set) (HOSE KIT)
$119.95 with s/s brackets
SPEED BLEEDER KIT FRONT GTM
Back to Top
Item Description
Price
Order
  NOTE: BLEEDERS ARE SOLD IN SETS OF 2 ONLY BLEEDING YOUR BRAKES COULD NOT BE BETTER THEN THIS, WITH SPEED BLEEDER 10 MM X 1.0 BLEEDER SIZE THREAD
$12.95
  GTM SPEED BLEEDER KIT FOR FRONT OR REAR WHEELS MADE BY RUSSELL (Set OF TWO SB1010) (BLEEDER KIT)
$12.95
KIT COMPLETE FRONT AND REAR WHEELS GTM (GENUINE GM C5 CORVETTE CALIPERS)
Back to Top
Item Description
Price
  NOTE; COMPLETE BRAKE KIT FRONT AND REAR WHEELS PLUS STAINLESS STEEL BRAKE LINE KIT MADE BY RUSSELL
NEW CALIPERS AND 13 INCH DRILLED AND SLOTTED ROTORS
Price$1150.00
  TWO FRONT CALIPERS AND TWO (MADE IN THE USA) CROSS DRILLED AND SLOTTED ROTORS
  TWO REAR CALIPERS POWDER COATED RED AND TWO (MADE IN THE USA) CROSS DRILLED AND SLOTTED ROTORS
GTM you can get this kit with hawk no dust pads for $139.00 type in note box at check out please add hawk pads
BRAKE FLUID
Back to Top
Item Description
Price
  NOTE; PYROIL DOT-4 IS THE HIGHIST RATING OF ALL BRAKE FLUIDS
1-12 FLUID OUNCE OF BRAKE FLUID
Price$5.95
  ALL CARS AND TRUCKS ALL Years (DOT-4 BRAKE FLUID) (Front or Rear Wheels AND CLUTCHES)
LOW MOISTURE ANTI-VAPOR LOCK
$5.95
BRAKE FLUID
Back to Top
Item Description
Price
  NOTE; PYROIL DOT-4 IS THE HIGHIST RATING OF ALL BRAKE FLUIDS
2-12 FLUID OUNCE OF BRAKE FLUID
Price$9.95
  ALL CARS AND TRUCKS ALL Years (DOT-4 BRAKE FLUID) (Front or Rear Wheels AND CLUTCHES)
LOW MOISTURE ANTI-VAPOR LOCK
$9.95
 
   About Us  |  Terms Of Service  |  Privacy Policy

Site Created, Maintained, and Hosted by db1racing.com
db1racing.com 888 558 5757 ©2000